Home > News

Solid Aluminum Panel Storage Tips

Oct. 15, 2018
Share:

In the factory of Solid Aluminum Panel Manufacturer, the production and processing of aluminum veneers may not be immediately sent to customers. In the process of processing, it is basically processed according to the drawings, and generally there will be no problem. But when the aluminum veneer comes out of the production line, it needs to be sent out as soon as possible. However, in the process of storage, if it is improperly stored, it is prone to discoloration and discoloration. In severe cases, even deformation may occur.

So, what should you pay attention to when you save the Solid Aluminum Panel from the production line?

1. During the preservation process, be sure to pay attention to the temperature and humidity of the place to be kept, maintain good ventilation, and try not to let the sun shine directly. Otherwise, there may be discoloration and fading.

2. In the process of saving, they cannot be stacked too close to each other. Because of carelessness, it is prone to scratches and deformations. So there needs to be a certain distance in the middle. In addition, the aluminum veneers need to be placed as flat as possible. If the stacking is too thick, accidents are likely to occur during loading and unloading, and the non-ventilated environment is also disadvantageous.

Aluminum veneer storage is a bit tricky, or most of the aluminum veneer products on the market are in good condition. Even if some aluminum veneer products are unqualified, some are due to reasons that may not be stored. Therefore, it is desirable to pay attention to the process of storing aluminum veneers.

Solid Aluminum Panel

  • Tel.: +86 635 358 4833
  • Fax: +86 635 358 6360
  • :
  • E-mail: sevenpanel@sevenpanel.com
  • Add.: Dong E county, Liaocheng city, Shandong Province, China, 252218

Copyright © Dong E Blue Sky and Seven Color Building Materials Co.,Ltd All Rights Reserved | Powered by