Home > News

Technique and method of folding and grooving of aluminum-plastic plate

Jul. 13, 2019
Share:

Technique and method of folding and grooving of aluminum-plastic plate

Aluminum-plastic board is more widely used, most of the time have to fold, today Aluminum Composite Panel Manufacturer would like to explain to you how to better the aluminum-plastic board fold.

First of all, we all know that the premise of aluminum-plastic plate folding aluminum foil is thick enough, the thicker the aluminum skin, the better the frilled edge, before the aluminum-plastic plate folding, first we must from the back of aluminum-plastic plate with slot machine, trimming machine), open a groove, otherwise can't frilled edge, the depth of the slot is according to the thickness of the aluminous model to adjust, the tool bit shorter, first try, slowly until seemed dew aluminum skin not dew, deep cause ruffled fracture easily scratch the aluminum skin, light the bad side of easy to crack.

Aluminum Composite Panel Manufacturer

Moreover is to choose the head, the head has U and V, U head is not easy to scratch the aluminum skin, but the Angle is not very straight, V head is relatively sharp folded out of the Angle is very straight, the Angle is better but easy to scratch the aluminum skin aluminum skin cracking, generally 4 mm aluminum plastic plate with 6# head can be.

And aluminum-plastic plate folding main aluminum skin, a lot of people can't ruffled the myth that raw rubber, glue to hem, actually this is wrong, for plastic folding is to get out of, so ruffled basically see the thickness of the aluminum skin, usually take the court often sell over 6 wire is completely meet the demands of a 90 - degree flanging, if it is need to use roller arc tube bending machine back up according to the construction requirements in the selection of rolling Angle, aluminous model board core material divided into middle, raw and cooked adhesive, can only be used if roller arc cooked glue can't use raw rubber, that is the more than ten years experience in the use of aluminum-plastic plate, for everybody reference.

That's all for the sharing, thanks for your reading, and we also supply Aluminum Composite Panel For Interior Wall for sale, if you have any demand for our products, just feel free to contact us.


  • Tel.: +86 635 358 4833
  • Fax: +86 635 358 6360
  • :
  • E-mail: sevenpanel@sevenpanel.com
  • Add.: Dong E county, Liaocheng city, Shandong Province, China, 252218

Copyright © Dong E Blue Sky and Seven Color Building Materials Co.,Ltd All Rights Reserved | Powered by